Modules

Expandable input number: 8Possible zone/PGM number: 8/7 (free input type choice)Working current:..

Product type Alarm system moduleWireless zones 16Receiver radio frequency 433 MHzData bus protocol KRBUSZone loop (detector) type WirelessMaximum wiring distance to CP 300 mPower supply 9 - 14 VCurrent consumption ≤15 mACompatibility with detectors 205Overall dimensions W x H x L in mm 78 x 50 x 19E..

Modelis: geminoProgrammed inputs: 4Programmed outputs: 2SIM card count: 2USB interface: YesIntegrated antenna: Yes..

Cable length: 1,8m..

..

Control panels supported by data interface: • SECOLINK (control panels: PAS8xx, Pxx)• DSC (control panels: PC5xx, PC5xxx, PC14xx, PC15xx, PC16xx, PC18xx)• PARADOX (control panels: SP4xxx, SP6xxx, SP7xxx, EVOxxx, MG5xxx, SP5500+5, SP6000+5,6, SP7000+5)Embedded-SIM (eSIM): YesUser SIM: YesExtra servi..

Data BUS protocol: KRBUSData BUS interface: Serial, KRBUS Report to security companies format: CID via GPRS Protocols used for report to security companies: E2, FIBRO, code KSP Compatible with SECOLINK control panels: All SECOLINK control panelsSupport for SG-SYSTEM II , III IP card: Yes Supported n..

Data BUS protocol: KRBUS Data BUS interface: internal KRBUSReport to security companies format: CID via GPRS Protocols used for report to security companies: E2, FIBRO, code KSP Support for SG-SYSTEM II , III IP card: Yes Compatible with SECOLINK control panels: "P" series control panels onlySupport..

system expansion with 8 zonessupport for:NO, NCEOL, 2EOL/NO, 2EOL/NC (alarm control panels only)3EOL (INTEGRA Plus only)programmable EOL resistance value (INTEGRA, INTEGRA Plus, VERSA, VERSA Plus only)support for vibration and roller shutter detectors (alarm control panels only)ability to connect to..

8 relay outputs for direct control of 230 V mains powered appliances8 programmable zonesinstallation directly on 35 mm DIN railoptical indicators of relay statecooperation with ACCO NET system (since 1.4 release)Environmental class according to EN50130-5: IIMax. number of inputs(zones): 8Max. number..

SpecifikacijaThe module is designed for use with the control panels of INTEGRA and INTEGRA Plus families, as well as with ACCO-NT access control panel. This device replaces the CA-64 PP module. The INT-PP allows for expansion of the control panel by additional 8 wired zones and 8 programmable relay ..

IP module for connection panel to Internet / CloudCMS messages, Cloud service, App management, remote programming, video verification etc...

KX-in is a 8 zones expansion module with autoprotection tamper box.Dimensions: W 106, H 80, D 25 mm..

Network support: Ethernet 10/100 Base T Data BUS protocol: KRBUS Reporting to security companies protocol: CID via Ethernet Maximum cable distance between panel and module: 300m Upload/Download protocol: TCP/IP via LAN connection check (HeartBeat): Periodic message to security companies from 5 sec....

Description: Extra power supplyOn-Board (open collector type) PGM: 2Rated voltage of power supply (AC): ~20 VMinimum AC voltage: ~16 VMaximum AC voltage: ~22 VMaximum long term output current of PWR20 (I+AUX + I+BELL + Ibattery charge):: ≤2,0 AMaximum current of slow blowing fuse used in primary AC:..

Control panels supported by data interface: • SECOLINK (control panels: PAS8xx, Pxx, S16)• DSC (control panels: PC5xx, PC5xxx, PC14xx, PC15xx, PC16xx, PC18xx)• PARADOX (control panels: SP4xxx, SP5xxx, SP6xxx, SP7xxx, EVOxxx, MG5xxx)Control panels supported by analog interface: All control panels wit..